马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？Register
×
Take KE-5K5L1EF as an example
1. Read the product instructions carefully
2. Prepare installation tools marker pen, measuring tape, impact drill, claw hammer, wrench
3. At least 1m above the ground, press the inverter against the wall, and use a marker to pass through the two small holes at the top of the inverter and mark the wall
4. Use an impact drill to drill holes in the wall according to the marks. Make sure the depth and width of the holes match the expansion bolts
5. Use a claw hammer to drive the expansion bolt into the hole on the wall, and remove the nut and two washers
6. Fix the inverter to the bolts, install the washers and nuts in sequence, and then tighten the bolts with a wrench
| 
